Teledu Fit For 2005-2008 Ford F-150 4WD 4Pcs Front Outer Tie Rod End Sway Bar Links Kit

Replacement of other types of suspension bushings is generally straightforward. Consult the service informationSway Bar Stabilizer Link Replacement Guideline:While driving, the following signs may indicate a faulty sway bar stabilizer link:(1).Rattling and thumping noises on rough roads(3).Stronger inclination of the vehicle during corneringIf the sway bar stabilizer link is found to be defective, it should be replaced as described below1.Raise vehicle and remove front wheelsTip:Always check both stabilizer links and replace them in pairs if necessary2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and removeTip:If the ball stud also starts to turn, hold it with a suitable tool4.Press stabilizer link out of torsion bar5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it6.Press stabilizer link at suspension strut out of bracket7.Insert new stabilizer link at suspension strut8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer9.Insert new stabilizer link at stabilizer10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturerTip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension12.Conclude with a test driveFrequently Asked Questions(1).When to replace tie rod ends?(2).Why should I get my tie rods inspected on a regular basis?(3).Vibrations(4).Shaking(5).Wandering(6).What is sway bar?(7).What are the symptoms of a bad sway bar?(8).What happens when a stabilizer bar breaks?(9).What is the most important tip to offer to help with anti-sway bar installation?The most important thing is to ensure is that your wheels are not hanging. The suspension should be compressed so the control arms, etc. are at the same position they would be if the vehicle were sitting at ride height. This can be done by using ramps, a drive on lift, or simply loading the wheels if the vehicle is on jack stands or a two point lift. If this is not done the arc that the bar and suspension moves through due to the excessive travel can make things very difficult to line up(10).How long will it take to replace the front sway bar? Brand: Unbrand Manufacturer Part Number: E80490501CP Interchange Part Number: ES3691 K80338 Placement on Vehicle: Front,Outer Surface Finish: Premium Quality Greasable or Sealed: Greasable Country/Region of Manufacture: China Kit or Single Part: Kit Kit Parts Included: Tie Rod End Stabilizer Bar Link Manufacturer Warranty: 1 Year OE/OEM Part Number: 4L3Z3A13CA 5L3Z5K483DA Items Included: Mounting Hardware Bundle Listing: Yes Adjustable: Yes Universal Fitment: No Type: Sway Bar Link Features: Greasable Finish: Coated Material: Alloy Steel Mounting Style: Bolt-On